Back to Resources

Use of granite is not limited to paving. It can be fabricated into a wide variety of products, dimensions, and profiles to meet the requirements of individual projects. Here are seven common applications, along with some of the practical considerations that should be addressed during design.

1. Granite Paving

Granite pavers, setts, and cobbles are the most familiar application of natural stone in urban, commercial, and residential construction projects. They are used in pedestrian plazas, sidewalks, courtyards, building entrances, promenades, and other outdoor gathering spaces.

The selection of granite color, unit size, shape, and paving pattern can have a significant effect on the character of a space. Large-format pavers in a sophisticated and understated gray granite can create a clean, contemporary appearance, while smaller units or contrasting colors may be used to establish patterns, borders, or transitions between different areas. Split or tumbled finish on granite setts and cobbles can suggest a more natural relaxed aesthetic.

Granite paving can also be fabricated in radial or irregular shapes to accommodate the paving patters or the geometry of a plaza, planting area, or pedestrian walkway.

Paver Thickness & Finish

The Natural Stone Institute suggests 1¼ inches as a minimum for exterior pedestrian stone paving. Larger units, unsupported spans, vehicular traffic, and different installation methods may require thicker stone. 2-inch and 3-inch granite pavers are common in urban streetscapes and plazas for heavy pedestrian and light vehicular traffic. It is always a good idea to assess the entire paving system with the help of an engineer, including the supporting substrate, setting bed, drainage, movement joints, and anticipated loading.

The most commonly used finish for granite paving is Thermal, sometimes also referred to as Flamed finish. The finish is achieved by applying extremely high temperature to the surface of stone, and it confers good slip resistance. Setts or cobbles are also available with a Thermal & Tumbled finish, where the walking surface remains flat and slip-resistant, while the edges have a more rough, antiqued appearance. This finish works well for projects where accessibility and ADA compliance are important, as it helps achieve a more natural, rustic look while providing the ability to maintain a tighter joint than can be achieved with a Split finish paving product.

2. Granite Steps and Stairs

Granite is frequently used for exterior stairs, ramps, terraces, and changes in elevation throughout a landscape. Steps may be fabricated as monolithic granite units or as individual treads and risers, depending on the needs of the project. Straight stairs and any radial configurations can be produced to accommodate the most demanding design requirements.

When choosing between using monolithic steps and separate treads and risers, designers should consider unit weight, handling, transportation, installation, supporting construction, and overall costs as much as appearance of the finished product. Suitability for the intended application also matters: for instance, in climates with prolonged period of sub-zero temperatures, using treads and risers or pistol-cut steps allows for placement of a snowmelt system below the granite.

For project involving radial stairway elements, the geometry should be established and verified before fabrication begins. The best way to ensure that the fabricated product meets the job specifications is through preparation and careful coordination of shop drawings. A well-developed set of shop drawings is especially valuable for projects with complexity, where small dimensional discrepancies can become difficult to correct during installation.

Get a Quote

We are here for all your stone needs. Reach out and one of our specialists will get back to you promptly.

This field is for validation purposes and should be left unchanged.